Archive for the ‘Stickles’ Category

1 Comment

You’re Da Bomb! (I’m just sayin’…) Valentine’s Day Card!


2011
01.06

Posted in Funky, Funny, Grunge, Indie Art Cricut Cartridge, Olive Juice Studio, Olive Juice Studio Inspirations(Gallery), Project Tutorials/Instructions, Random Posts, Stickles, Valentine's Day Craft | 1 Comment »

I have to admit I have a pretty healthy supply of Cricut cartridges (Please don’t ask me how many because I honestly have no idea and I’m not sure we need to go there just in case my hubby is reading this.  Hi Dear!  Love ya!)  I’m not one to hide things from my hubster…<insert clearing throat here>…ahem…I’m just sayin’….) LOL!  Just kidding!!  Anyway, my point is that with all of the adorable Valentine’s or shall I say lovey-dovey cuts available you would think I’d be cutting  out those images instead… or at least something from a new cartridge….but no, I have to show my rebellious side by making a card using the bomb from the Indie Art cartridge – isn’t Indie Art now a discontinued one too?!  LOL! I know Indie Art has always had mixed reviews.  People either loved or hated it when it first came out…  I don’t know about you, but for the longest time Indie Art was one of my favorite cartridges, probably because it’s so non-traditional and the cuts can be used in so many fun and quirky ways. :-)  That’s me you know, quirky crafty Kim. :-)  
So in honor of kicking off the “LOVE” theme this month for the January Challenge I wanted to tell all of you that I think “You’re Da Bomb!”

 Want to make a card just like this one? 

Here’s the recipe!

Ingredients:

 Cricut

Indie Art Cricut Cartridge

Your preferred Cricut font cartridge

White premade card or make your own measuring 5″x7″

1-2 old book pages 

Cardstock in the following colors:  black, red, white, silver, brown

Inks for distressing ( I used red, black and silver)

Stickles (Glitter Glue) in Red and Silver

White Pen

Your preferred adhesive

Pop dots (or dimensionals!)

Small piece of red tulle approximately 3″x5″ piece

Small piece of aluminum foil or silver paper

Directions:

 

1.  Using Indie Art cut the bomb – botton and top layer.  I cut the bomb at 4 3/4″.  The first layer the shadow/blackout layer was cut out of white paper.  The top layer was cut from black paper.  Don’t forget to cut the flame also from red paper leaving the size set at 4 3/4″.  I cut two of the flames and glued the end together that slips under the bomb and then curled the ends forward to give more dimension. Also, cut the matchstick from brown and the top of the match from red paper.

2.  Cut the phrase “You’re Da Bomb” from your preferred Cricut font cartridge.  I have to admit.  I made this in a flurry and have been working on several things and I cannot for the life of me remember which font this is ….Can anyone tell just by looking?  I want to say it’s Lyrical Letter BUT….I’m not positive!  I do know that I cut it at 1/2″ from the red paper.

3.  Okay, time to assemble! 

  • First thing we’re going to do is tear the old book page(s) into small squares.  Ink all four sides with red ink and a light dab of silver ink for extra Ooomph! Next, adhere the bookprint squares to the card front overlapping a bit so it resembles a collage look.  Any excess hanging off the edge of the card can be trimmed.
  • Next, assemble the bomb.  Ink the edges of all pieces with black and silver ink.  Place a small piece of aluminum foil or silver paper large enough to be centered underneath the top layer opening that resembles a bean shape.  Glue to the base cut making sure it lines up with the top layer so that the silver paper/foil shows through the top layer opening.  Next, add pop dots (dimensionals) to the back of the top layer and attach together.  Attach the bomb to the front of the card with more pop dots for extra dimension.
  • Using a white pen and a heavy hand, outline the “starburst explosion” that’s the part underneath the flame. 
  • Attach the phrase “You’re Da Bomb” to the bottom of the bomb using the photo for placement.
  • Assemble the matchstick and glue to the card front using the photo for placement.

4.  Now, for the final details!  Add silver dots with Stickles (or any glitter glue) around the bean shaped opening on the bomb and around the white shadow part of the bomb (the bottom layer) in groups of three dots.  Also add silver dots around the explosion to add random sparkle.  Use red Stickles on the flame, matchstick and letters.

5.  Scrunch up a small piece of red tulle and place under the top left of the bomb so that the top of the netting flares out.  Add red glitter dots for extra bling randomly using caution to not get it on the card. 

6.  For the final hurrah!  Make sure to ink all four sides of the card with red ink and then a dab of silver here and there – gives the card a nice finished look.

7.  The inside of the card reads “I’m just sayin’….Happy Valentine Hot Stuff!”  This can be cut using a font cartridge and your Cricut or simply by using your computer and printer.

I hope this Valentine card has caused an explosion of creativity!

Olive making Valentine’s Day crafts, don’t you?

xKim

2 comments

“Merry Holly Days” Winter Frolic Cricut Cartridge Christmas Card!


2010
12.01

Posted in Book Pages, Christmas Projects, Cricut, Cricut Card, Cricut Cartridges, Ephemera, Funky, Olive Juice Studio Inspirations(Gallery), Pop Dots, Project Tutorials/Instructions, Stickles, Tim Holtz ink, Vintage | 2 Comments »

And here is the second card I made!  *still wiping the sweat away…”  Man that was work grasping for a creative brain cell! *wink*

This card was also made using the Winter Frolic Cricut cartridge.  Did I mention that I LOVE this cartridge?  Yeah?  I thought I did but just wanted to make sure you caught that in the other post I made using Winter Frolic. *insert smirk here.*

So…here’s card #2 after almost two months of ZERO mojo….well…no mojo and no time to even attempt  to be creative but last night I pulled out my craft stuff and dug in…I actually think I might have time ( if I scramble) to whip up a few more things tomorrow before packing things up again….keep your fingers crossed for me! *grin*

This snazzy little penguin card was made using two different Cricut cartridges – Winter Frolic and A Child’s Year. 

Ingredients:

Cricut or Imagine

Winter Frolic Cricut cartridge

A Child’s Year Cricut cartridge

Core’dinations medium green/black cardstock

black, light pink, medium pink, white, yellow, light turquoise and off-white cardstock for Cricut cuts

small piece of sheet music

Stickles (glitter glue) I used yellow and Diamond (clear)

Tim Holtz Distress Ink in Vintage Photo and Antique Linen

felt snowflake pieces ( these are from Paper Studio- Hobby Lobby) 

1 light pink styrofoam ball  or a pom pom for top of hat (found in floral section at craft stores)

“Merry Holly Days” stamp or your preferred stamp sentiment or use your computer and printer!

2″ wide ribbon – I used a light pink with fuschia polka dots!

Preferred adhesive

Pop Dots

Scissors

Directions:

1.  Using “A Child’s Year” Cricut cartridge and the turquoise paper, cut the card from page 75 of the handbook.  I cut this card at 6″ so the actual card measures 4 3/4″ x 6″.

2. Using the score lines, fold the card using your preferred scoring tool.  Ink the edges using Tim Holtz Distress ink in Vintage Photo.

3.  Insert the “Winter Frolic” Cricut cartridge and cut the penguin at size 5″ from page 57 of the handbook.  Cut the bottom layer in the off-white cardstock and the top layer in black.  Trace the rounded part of the belly onto a piece of sheet music and cut by hand or cut the bottom layer using the sheet music and attach to the off-white cardstock for extra stability. Ink lightly using the Tim Holtz Distress ink in Antique Linen.

4.  Cut the lollipop parts by selecting  the “layer” feature key once with shift selected and once without.  Use a variety of colors to get the desired lollipop color  I cut the lolliop base in off-white, then the stripes in light pink, medium pink and turquoise.  Assemble and glue together.

5.  Cut the hat first in light pink at size 5″ and then the top layer in the medium pink.  Assemble by stacking and attaching with a pop dot between the layers.  Glue to the top of the penguin and attach the small pink styrofoam ball or pompom for the top of the hat.

6.  Tie the ribbon completely around the front panel and tie into a bow.  Trim the bow edges to desired length.

7.  Stamp card sentiment or print using your computer and printer on a piece of light turquoise paper.  Hand cut the sentiment and attach to a scrap of sheet music.  Again, hand cut leaving a slight border and then ink. 

8.  Cut the scarf found in the Winter Frolic handbook on page 31 of the handbook.  For this scarf to fit across the front of the penguin it needs to be cut at 7″ and then trimmed slightly.  Ink and attach.

9.  Attach the penguin to the card front overlapping the ribbon.  The penguin’s hat will hang off the top of the card.

10. Add the sentiment to the card front – use the sample photo for placement.

11.  Add three different sizes and colors of felt snowflakes stacked and glued together and then glued to the center of the bow.

12.  Glue felt snowflakes to the card front.

13.  Add Stickles (glitter glue) to the penguin’s scarf, hat trim, beak and feet.  Also add a few dots of clear glitter glue to the corners of the sentiment.

I4.  Once the scarf is dry, cut small slits in the scard ends and curl upward.

Wa-La!  Another super fun Christmas card using the Winter Frolic Cricut cartridge!  I hope you like it!

xKim

2 comments

“Brrrr! ….Baby it’s Cold Outside…” Winter Frolic Christmas Card


2010
11.30

Posted in Christmas Projects, Cricut, Cricut Card, Cricut Cartridges, Humor, Humorous, Pop Dots, Project Tutorials/Instructions, Stickles, Tim Holtz ink, Vintage, Winter Frolic | 2 Comments »

Well?  What do you think? 

I MADE A CARD….ALL BY MYSELF!!! *insert look of shock and dismay here.*  I actually made TWO cards for Memory Miser for my December gig and this is one of them - thank goodness Marla over there is a doll to work with and has let me a slide a bit with my designer responsibilities the past month or so because I swear my brain went bu-bye for a while.  It’s been well over six weeks since I’ve made anything with paper… I had to SQUEEZE….and PULL…and…STRETCH…and PRAY for just a dash of inspiration…and after a glass of wine and some Christmas Carols *hiccup*…..    I seriously think there just might be hope!  *go ahead roll your eyes here.* Anyway, I think my mojo is starting to waken because  after hours AND hours of deliberation last night THIS is what happened! Whew!  I’m still wiping the sweat from my forehead because I really did have to work it but I do have to say, I am happy with the outcomes and think the card turned out pretty darn cute!  I have had Winter Frolic for several months but just took it out of the plastic last night – I LOVE IT!  I have to say it’s my “new favorite” cartridge, especially for winter/Christmas stuff – just so charming and vintage-y!  If you don’t have it yet or couldn’t decide if you needed it, guess what?  You do!  LOL!  So you better go git it cuz yer gonna love it!

 

Brrrr!   

Inside reads:  “Baby it’s Cold Outside!  Wishing You a Warm & Fuzzy Holiday Season!”

Ingredients:

 Cricut or Imagine

Winter Frolic cartridge 

Light turquoise cardstock to make a 4 ½” x 6 1/2”  card 

Alphabet/Red and white polka dot (reverse side)paper  

White embossed cardstock or make your own using your favorite embossing folder and Cuttlebug! 

Black, red, brown, light pink and turquoise paper cardstock scraps 

Turquoise glitter ribbon (purchased from Hobby Lobby!) 

2 clear flat backed stones 

1 clear turquoise flat backed stone

 Small piece of orange felt for carrot nose 

Glue dots 

Pop dots  

Your preferred adhesive 

Stickles (glitter glue) in a clear diamond, turquoise and light pink 

Tim Holtz Distress inks in Vintage Photo and Antique Linen 

Paper cutter

Scissors

 

Directions: 

1.       Cut a piece of turquoise paper to 6 ½”x 9”.  Fold in half using your preferred scoring tool to make a card measuring 4 ½” x 6 ½”.

 2.     Cut a piece of the alphabet paper/red and white polka dot paper to measure 4 ½” x 6 ½”.  Tear the top edge of the paper holding the paper in one hand and pulling the paper toward you with the other so the right torn edge is on the piece that you will use on the card.  Lightly ink the edges with Tim Holtz Distress Ink in Antique Linen.  Attach to the front of the turquoise card base.  Use the photo for placement. Ink the edges using Tim Holtz Distress ink in Vintage Photo.

 3.      Tear another piece of the alphabet/red and white polka dot paper so that it measures approximately 3 ½” x 4 ½”.  Lightly ink the edges with Tim Holtz Distress ink in Antique Linen.  Attach to the red and white polka dot paper on the front of the card. 

4.      Using your Cricut and the Winter Frolic cartridge, cut the snowman located on page 28 of the Winter Frolic handbook at size 5”.  Cut the bottom layer in brown, the top layer in embossed white cardstock.  Slip a small piece of black cardstock scrap under the white snowman where the eyes and mouth are located.  Glue the pieces to the brown snowman layer.  Lightly ink using Tim Holtz Distress ink in Antique Linen.

 5.      Cut the gloves, cheeks and bowtie using the shift key and  the “layer” feature key cut the hat from black paper, the cheeks from pink and the gloves from red paper.

6.      Cut the word “Brrrr!”  found on page 33 of the Winter Frolic handbook.  Cut it using the “phrase” feature key and the bunny key on the keypad overlay.  Cut at 1 ½”  on black cardstock.  Next, cut the top layer from turquoise cardstock by selecting the “shift” key and the bunny on the keypad overlay.  Glue the turquoise layer to the top of the black word.

 7.    Attach the remaining pieces to the snowman – add the gloves, hat, bow tie and cheeks. 

 8.    Using the carrot nose cutout as a guide either trace or cut around the carrot nose on orange felt for extra dimension.  Attach using a glue dot or liquid glue.

9.    Attach the snowman to the card front (use the card photo for placement) using pop dots. 

10.  Glue the word “Brrrr!” to the card front so that the word goes across the bottom of the snowman. 

 11.  Add the clear flat backed stones to the upper left corner of the card using liquid glue or mini glue dots.

12.  Tie a small bow with the turquoise glitter ribbon and glue to the upper right corner of the card.

 13.  For final pizzazz, add Stickles (glitter glue) to the embossed area of the snowman, the tie, gloves, hatband, and the top layer of the word “Brrrr!”

14.  Decorate the inside with remaining pieces of the alphabet/red and white polka dot paper and the phrase “Baby it’s Cold Outside” found in the Winter Frolic handbook on page 47 or type a sentiment on your computer and print it out to add to the inside.

 I hope you enjoyed!

Olive my crafty friends, don’t you?

xKim

4 comments

Abby Cadabby Birthday Invitations


2010
09.01

Tags:
Posted in Humor, Humorous, Olive Juice Studio, Olive Juice Studio Inspirations(Gallery), Project Tutorials/Instructions, Random Posts, Stickles | 4 Comments »

This is one of the projects that has kept me quite busy the past few days, 35 Abby Cadabby invitations for a three year old’s birthday.   It was really fun to do something ”girly” and use soft colors  after making boy invitations with robots, monsters and dinosaurs for the past 10 years! The card is in all pastels which is why is why it was so hard to get a good picture to post!  I did use the Cuttlebug and three different embossing folders.  Abby is just an image I found online that I  printed out in color.  There are three paper layer/mats  underneath her and then Abby was attached to the card using pop dots.  I added some clear glitter glue to her dress and wings.  “It’s a party” was cut from the Celebrations Cricut cartridge.  I knotted a piece of light blue tulle with silver dots and added the white silk flower with a pearl to the top.  It’s hard to tell in the photo but I also used a soft pink ink dot to distress the edges.  The inside has the same pastel green mat for my customer to add her own personal sentiment on top of (that’s the way she ordered the cards).  It’s times like this that I WISH Abby Cadabby could make my wishes come true by turning my printer into an Imagine (not a pumpkin like she does to everything on Sesame Street!) – I could have really put that new machine to use this past week! :-)

Happy Crafting!

xKim

4 comments

Vintage Bridal Shower/Wedding Tag


2010
08.22

Posted in Ephemera, Funky, Olive Juice Studio, Olive Juice Studio Inspirations(Gallery), Project Tutorials/Instructions, Random Posts, Stickles, Tags & Wall Art, Vintage | 4 Comments »

Many of us are probably inundated with weddings, bridal showers, etc from summer to fall leaving us scratching our heads on what to make or give for a gift.  Try whipping up a tag like this to add to your gift or slip it  into an envelope with a gift card!

Here’s an adorable tag I whipped up this weekend using a bridal shower card from 1931 as the inspiration.  It’s funny because all of the items I used to make this tag were things that were sitting on my desk waiting to be sorted through.  If you haven’t been following my blog over the past month I have been REALLY busy cleaning, painting, switching rooms and organizing my craft space.  Oh, I’m far from being done but I’m getting closer each day!  :-)  I’m at the point where I can find a lot of my things for the first time so I can’t help but stop for a spell to craft something up!

The tag I used is a premade chipboard piece I’ve had in my stash for a long time and was one of those things still sitting on my desk so I decided to do something with it.  The card I used fell out of a box and was sitting on my desk so I challenged myself into making a cute tag with these items.  The sticker is from ___ (I’ll add that later because I can’t remember!)

How did I make it?

All I did was add the card to the front of the tag and added Stardust Stickles to the pink ribbon and blue flowers on the card to add  a bit of vintage bling.  The green frame is from a Making Memories set I’ve had for a few years that I also added Stickles too. The ribbon is an off-white ruffled piece that I glued with a hot glue gun to the bottom front of the tag.  The flower is from Prima.  I bent the petals a bit and glued ‘er down!  A light yellow/green satin piece of ribbon was added to the tag to hang and sha-bam!  A super cute and super simple vintage tag!

I hope you like it!

xKim

2 comments

So Last Year… Cricut Easter/Spring Card


2010
02.02

Posted in Book Pages, Cricut Card, Easter Card, Easter Cricut Cartridge, Feather Boas, Flocked Paper, Forever Young Cricut Cartridge, Funny, Humor, Pop Dots, Prima Flowers, Spring, Stickles, Tim Holtz ink | 2 Comments »

Whip one up and send us a photo!  We’d love to see your spin on the card or the saying…or whatever!!! 

Olive Juice Studio is using WP-Gravatar